inteliLIGHT® FPX-220 LonWorks® compatible luminaire controller

The controller is designed to be used in controlling decorative lighting, architectural lighting, lamps up to 500W and contactors. An universal device, inteliLIGHT® FPX-220 operates with any lamp or electric device by controlling the power supply of the connected unit.

technical details

Lamp Type LED, CF, HID
Maximum lamp power 500W
ON/ OFF  function yes
Dimming no
Dimming range no
Dimming steps no
Control interface no
Network interface PowerLine CENELEC-C band
Communication protocol LONWORKS/ANSI709.1
Retransmission mechanism yes
Power supply 230VAC / 50Hz – 60Hz
Overvoltage protection 5 minutes @ 400VAC
Power consumption Max. 2W
IP rating IP67
Operating temperature -25°C to +65°C
Dimensions (length x width x height) 106 x 75 x 51 mm
Certifications CE, EN 50065-1 (2005), EN 50065-2-1 (2003),EN 61547 (2010), EN 55015 (2007), EN 61000-3-2 (2006), 60068-2-1 (2007),60068-2-2 (2007), ANSI/IEC 60529, LonMark OLC

measured parameters

Lamp power yes
Line voltage yes
Current yes
Active power yes
Reactive power yes
Apparent power yes
Power factor yes
Energy consumption (active/ reactive) yes
Running hours yes

alarms monitored

Over/ under voltage detection yes
Over/ under current detection yes
Lamp or ballast fault detection yes
Device failure yes

configurable parameters

Auto on enabled/disabled/ auto on time yes
Auto off enabled/disabled/auto off time yes
Start state: ON/OFF yes
ON/OFF power threshold yes
Overvoltage threshold yes
Output transfer function no
Strike retry count yes
Fade time no
Lamp warming time yes
Lamp cooldown time yes
Operation mode ON/ OFF
Optional sensors available Pole door open, pole impact detection, pole ground missing