inteliLIGHT® FRE-220-P-S inside pole Sigfox compatible luminaire controller
- Enables individual remote management of streetlight lamps with electronic driver up to 400W (ON/ OFF/ Dimming).
- Specially designed and optimized for LPWA networks.
- Autonomous operation based on predefined schedules and digital input (light level sensor and adaptive lighting).
- Adaptive lighting capabilities based on digital input for motion sensing.
- Bandwidth efficient with minimal communication requirements.
- Dedicated high-security memory for encryption keys storage.
- Wide range of electrical parameters monitoring: V, W, A, VAR, Wh, VARh and PF.
- Advanced data synchronization and notification mechanism.
- Battery operated RTC, protected against unforeseen communication failure.
- Local infrared interface for local configuration.
- Integrated digital input.
- Designed lifetime: 10+ years.
technical details
| Lamp Type | LED, CF, HID with electronic driver |
| Maximum lamp power | 400W (optional up to 750W) * |
| Functions / Operation mode | ON / OFF / Dimming |
| Dimming range | 1%-100% (depending on lamp control gear) |
| Control interface | 0-10V/ 1-10V, DALI |
| Power supply | 85 – 260VAC / 50Hz-60Hz |
| Local interface | infrared |
| Network interface | Sigfox |
| Supported frequencies | RCZ1 Europe , RCZ2 US, RCZ4 AU/NZ/Taiwan/Singapore |
| Inter-node mesh communication | Optionally available, with motion sensor add-on |
| Firmware update | IR (infrared) / OTA (over the air) |
| GPS | No |
| Security | Encrypted communication based on security keys |
| Surge protection | 10kA |
| Internal scheduling memory | 128 events (daily / weekdays / weekends / fixed date / exceptions) |
| Average power consumption | 1W |
| Maximum power consumption | 2W |
| Precision Real Time Clock (RTC) | Battery operated |
| Real-time lamp operation | No |
| Digital input | 1x dry contact (for PIR sensor, photocell sensor, open door sensor etc.) |
| IP rating | IP66 |
| Operating temperature range | -25°C to +65°C |
| Weight | 230 ± 5 g |
| Dimensions (length x width x height) | 126 x 57 x 42 mm |
| Mounting | DIN RAIL |
| Compliant standards | CE, RoHS, EN 61000-3-2(2014), EN 61547(2009), EN 60068-2-1(2007), EN 60068-2-2(2007), Prequalified according to ETSI EN 300 220 |
| Certifications | CE, FCC- in progress |
* The controller can be used for luminaires over 750W together with an external contactor, and with limited functionalities (no dimming, no measurements).
measured parameters
- Lamp power
- Line voltage
- Current
- Active power
- Reactive power
- Apparent power
- Power factor
- Energy consumption (active/ reactive)
- Lamp / controller – running hours counter
- Lamp On / Off cycles counter
configurable parameters
- Astronomical calendar scheduler
- Predefined scheduler
- Start state (Input / Schedule / Manual)
- ON/OFF power threshold
- Over/ under voltage threshold
- Over/ under current threshold
- Strike retry count
- Fade time
- Lamp warming time
- Lamp cooldown time
- Data transmission setup
- Alert priority setup
alarms monitored
- Over/ under voltage detection
- Over/ under current detection
- Lamp or ballast fault detection
- Device failure
optional antennas
ANT-601
