inteliLIGHT® FRE-220-NEMA-S Sigfox compatible luminaire controller

  • NEMA socket connected (ANSI C136.41).
  • Enables individual remote management of streetlight lamps with electronic driver up to 400W (ON/ OFF/ Dimming).
  • Specially designed and optimized for LPWA networks.
  • Autonomous operation based on predefined schedules, light level sensor and adaptive lighting.
  • Adaptive lighting capabilities based on digital input for motion sensing.
  • Bandwidth efficient with minimal communication requirements.
  • Dedicated high-security memory for encryption keys storage.
  • Wide range of electrical parameters monitoring: V, W, A, VAR, Wh, VARh and PF.
  • Advanced data synchronization and notification mechanism.
  • Battery operated RTC, protected against unforeseen communication failure.
  • External infrared interface for local configuration.
  • Integrated light level sensor.
  • Over The Air (OTA) firmware update.
  • Designed lifetime: 10+ years.

technical details

Lamp Type LED, CF, HID with electronic driver
Maximum lamp power 400W (optional up to 750W) *
Functions / Operation mode ON / OFF / Dimming
Dimming range 1%-100% (depending on lamp control gear)
Control interface 0-10V/ 1-10V, DALI
Power supply 85 – 260VAC / 50Hz-60Hz
External interface infrared
Network interface Sigfox
Supported frequencies RCZ1 Europe , RCZ2 US, RCZ4 AU/NZ/Taiwan/Singapore
Inter-node mesh communication Optionally available, with motion sensor add-on
Firmware update IR (infrared) / OTA (over the air)
GPS Optional
Security Encrypted communication based on security keys
Surge protection 10kA
Internal scheduling memory 128 events (daily / weekdays / weekends / fixed date / exceptions)
Average power consumption 1W
Maximum power consumption 2W
Precision Real Time Clock (RTC) Battery operated
Real-time lamp operation No
Digital input 1x dry contact (for PIR sensor, photocell sensor, open door sensor etc.)
IP rating IP66
Operating temperature range -25°C to +65°C
Weight 220 ± 5 g
Dimensions (diameter x height) 84 x 98 mm
Mounting 7pin NEMA socket (ANSI C136.41)
Compliant standards CE, RoHS, EN 61000-3-2(2014), EN 61547(2009), EN 60068-2-1(2007), EN 60068-2-2(2007), Prequalified according to ETSI EN 300 220
Certifications CE, FCC- in progress

* The controller can be used for luminaires over 750W together with an external contactor, and with limited functionalities (no dimming, no measurements).

measured parameters

  • Lamp power
  • Line voltage
  • Current
  • Active power
  • Reactive power
  • Apparent power
  • Power factor
  • Energy consumption (active/ reactive)
  • Lamp / controller – running hours counter
  • Lamp On / Off cycles counter

configurable parameters

  • Astronomical calendar scheduler
  • Predefined scheduler
  • Start state (Photocell / Schedule / Manual)
  • ON/OFF power threshold
  • Over/ under voltage threshold
  • Over/ under current threshold
  • Strike retry count
  • Fade time
  • Lamp warming time
  • Lamp cooldown time
  • Light level threshold
  • Data transmission setup
  • Alert priority setup

alarms monitored

  • Over/ under voltage detection
  • Over/ under current detection
  • Lamp or ballast fault detection
  • Device failure