inteliLIGHT® FRE-220-NEMA-WS Wi-SUN compatible luminaire controller

- NEMA socket connected (ANSI C136.41).
- Enables individual remote management of streetlight lamps with electronic driver up to 400W (ON/ OFF/ Dimming).
- Specially designed and optimized for Wi-SUN (IEEE 802.15.4g RF MESH).
- Autonomous operation based on predefined schedules, light level sensor and adaptive lighting.
- Adaptive lighting capabilities based on digital input for motion sensing.
- Bandwidth efficient with minimal communication requirements.
- Secure communication based on encryption keys.
- Wide range of electrical parameters monitoring: V, W, A, VAR, Wh, VARh and PF.
- Advanced data synchronization and notification mechanism.
- Battery operated RTC, protected against unforeseen communication failure.
- External infrared interface for local configuration.
- Integrated light level sensor.
- Over The Air (OTA) firmware
- Designed lifetime: 10+ years.
technical details
Lamp Type | LED, CF, HID with electronic ballast |
Connection | 7pin NEMA socket (ANSI C136.41) |
Maximum lamp power | 400W |
Functions / Operation mode | ON/ OFF / Dimming |
Dimming range | 20%-100% (depending on lamp driver) |
Control interface | 0-10V/ 1-10V, DALI |
External interface | infrared |
Communication protocol | Wi-SUN (IEEE 802.15.4g RF MESH) |
RF spectrum | 868MHz / 915MHz / 923MHz / 2.4GHz |
Firmware update | IR (infrared) / OTA (over the air) |
GPS | optional |
Security | encrypted communication based on security keys |
Power supply | 85 – 260VAC / 50Hz-60Hz |
Surge protection | 10kA |
Internal scheduling memory | 128 events (daily / weekdays / weekends / fixed date / exceptions) |
Average power consumption | 0.5W |
Maximum power consumption | 1W |
Precision Real Time Clock (RTC) | Battery operated |
Real-time lamp operation | yes |
IP rating | IP66 |
Operating temperature range | -25°C to +65°C |
Dimensions (length x width x height) | 76 x 96 mm |
Compliant standards | RoHS, EN 61000-3-2(2014), EN 61547(2009), EN 60068-2-1(2007), EN 60068-2-2(2007), Prequalified according to ETSI EN 300 220 |
Certifications | CE FCC ( in progress) |
measured parameters
- Lamp power
- Line voltage
- Current
- Active power
- Reactive power
- Apparent power
- Power factor
- Energy consumption (active/ reactive)
- Lamp / controller – running hours counter
- Lamp On / Off cycles counter
configurable parameters
- Astronomical calendar scheduler
- Predefined scheduler
- Start state (Photocell / Schedule / Manual)
- ON/OFF power threshold
- Over/ under voltage threshold
- Over/ under current threshold
- Strike retry count
- Fade time
- Lamp warming time
- Lamp cooldown time
- Light level threshold
- Data transmission setup
- Alert priority setup
alarms monitored
- Over/ under voltage detection
- Over/ under current detection
- Lamp or ballast fault detection
- Device failure